1 / 3
Mounts for Gophert Power Supplies (NPS-1600, NPS-1601, CPS-3205 etc.) — zdjęcie 1
1 / 3

Mounts for Gophert Power Supplies (NPS-1600, NPS-1601, CPS-3205 etc.)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount a Gophert power supply (NPS-1600, NPS-1601 etc.) to a shelf board (from below) saving some space on the workbench.

Ocena
5 / 5
Polubienia
3
Pobrania
25
Wydruki
1
Wyświetlenia
124
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

To free some space on my workbench I wanted to attach my Gophert power supplies to a shelf above it. So I designed these mounts which also offer the extra benefit of keeping these light and compact devices in place while being operated.

The mounts do not require any modification to the power supplies as they are simply using the fins and channels as well as the backplate of the enclosure to hold the device.

You'll need two of the “Gophert_NPS-1601_holder-Sides_Front” parts and one of the left and right rear parts each. Attach the parts as shown (see pictures) skipping the topmost channel of the extruded enclosure. Then mount the assembly to e.g. a shelf board using four screws while holding the printed parts flush with the side channels of the enclosure.

 

Print Settings

Printer:

Flying Bear Ghost 4

Rafts:

No

Supports:

No

Resolution:

0.3 mm

Infill:

30% 

Filament:

PET-G (PLA probably works as well)

Tagi