Parametric OpenSCAD endcap for square tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Create a endcap for a square turb
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 359
- Wydruki
- 1
- Wyświetlenia
- 822
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Description
This customizer require 8 parameter.
-Horizontal dimension (X direction)
-Vertical dimension (Y direction)
-The thickness of the tube
-Length of the part inserted on the tube (minimum recommended is 15mm)
-Thickness of the cover (recommended 3mm or more for effective protection)
-The size or height of the gripper. 4mm works fine.
-Thickness of the gripper. For a 0.4mm nozzle I recommend 0.5mm.
-Resolution. Just use half of the layer height you intent to use.
If you got a loose fit, try to decrease the tube thickness on the customizer.
Print your endcap as delivered with no support. I made mine with PETG.
Using OpenSCAD
- download OpenSCAD https://openscad.org/downloads.html
- open the .scad file
- make any changes you need
- Use F5 to preview the model or via the menu Design/Preview
- Once you are happy with the model use F6 to Render the model or via the menu Design/Render
- Use F7 to Export the STL or via the menu File/Export/STL
You can find shortcuts for preview, render and STL on the menu bar