PS Vita 1000 / OLED Slide Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The case protects the screen, buttons, and joysticks of the Vita for quick and easy travel and makes it slim as possible
- Ocena
- 5 / 5
- Polubienia
- 78
- Pobrania
- 604
- Wydruki
- 3
- Wyświetlenia
- 4784
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The case protects the screen, ports, buttons, and joysticks of the Vita for quick and easy travel and makes it as close to pocketable as humanly possible.
This can be printed without supports, upright from the closed end. If you print it large, flat side down, the lip of the case comes to too sharp of an edge for my liking.
The case friction fits nicely onto the vita. I used a carbon fiber composite filament that left an almost imperceptible line along the back of the vita- pure filament may not have this issue. I've used mine for months without any additional perceived wear, while keeping my Vita in my pockets and quick-deploying it in anything as long as an elevator ride.
“Tough” PLA, nylon, or PETG will be softer than PLA and may be less likely to leave any scratching; I recommend using one of those if you have it available!