Sim Racing Visor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sim Racing Visor Designed to simulate vertical field of view for modern day formula 1 (35 degrees) and GT (38 degrees)…
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 235
- Wydruki
- 0
- Wyświetlenia
- 6473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sim Racing Visor
Designed to simulate vertical field of view for modern day formula 1 (35 degrees) and GT (38 degrees) helmets.
A third design for racing with 32 inch and smaller triple screens (30 Degrees).
A fourth design with integrated ear phones packets for motor cycle in helmet sound systems.
You may ask why, but it works better than you think. It is something between triples and VR.
You will need to come up with padding and strap to fit.
Amazon has 1/4 in. 1/2 in and 3/4 in neoprene padding sheets you can cut to fit or helmet replacement padding.
Print Settings
Printer Brand:
Raise3D
Printer:
N2+
Rafts:
Yes
Supports:
Yes
Resolution:
.25
Infill:
10%
Filament:
NA PLA
Notes:
Print upside down to minimize print time and material.
Print time 25 hoursCategory: Audio