MarkIII Hinged Electronics Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for a Mark III Mr. Baddeley Astromech. Pairs with my NeoDrive and MarkIII Lipo Battery Mount.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 3505
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This uses “skateboard” bearings to create a hinged panel for easy access for initial wiring and any maintenance. I use magnets to hold the panel in the vertical position with one bolt to prevent it from bouncing off accidentally.
Additionally, I have included a mounting pad for the Pololu Maestro 18 for the front interior of the droid for making wire management easier.
I have mounting positions for the following:
Sure 12V Audio Amplifier
Human Cyborg Relations Sound Module
Roam-A-Dome Control Module
Kyber Control
Syren 10A
12-5V Buck Converter
Power Switches
Fuses
FrSky X8R Radio Receiver
Use M4 Heat Inserts in the side mounts.
Use 10mmx5mm Neodymium magnets
Includes 200mm cut options if you have a small printer.