snakeinplace - Print-in-place and Articulated Puzzle Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
snakeinplace - Print-in-place and Articulated Puzzle Toy
- Ocena
- 4,778 / 5
- Polubienia
- 478
- Pobrania
- 1573
- Wydruki
- 32
- Wyświetlenia
- 8442
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I wanted to recreate one of the toys from my childhood but designed it as a print-in-place model.
I made two 3d printable versions where one is completely print-in-place and a version where you can snap-fit some colors onto it.
-no support structures
-0,15mm layer height
Subscribe or follow me on
Instagram: https://www.instagram.com/agepbiz/
Twitter: https://twitter.com/agepbiz
This was 3d printed on a Prusa Mini+ using Fillamentum PLA
I recommend printing the “snakeinplace_testpart.stl” first to make sure your printer can handle the clearance between the articulated parts. PLA wears down over time due to friction so the joints might become loose