1 / 4
Sunlu FilaDryer Filament Dryer S2 PTFE Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All the other adapters I found didn't convince me. So I designed my own.
- Ocena
- 4,938 / 5
- Polubienia
- 153
- Pobrania
- 1152
- Wydruki
- 20
- Wyświetlenia
- 5169
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 20) (Komentarze: 27)Remiksy (2)Kolekcje (246)Powiązane
With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easily removable.
You need to remove the small tube part in one of the holes of the FilaDryer to have a better angle of the PTFE tube into the dryer, just push it out.
You need the following parts.
- 1x M10 PC4-01 Bowden Connector
- A piece of heat-resistant double-sided foam tape (3M VHB is recommended).