Pickett-Hamilton Fort easy print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print Pickett Hamilton Fort
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Come support these models over on Patreon Buy my time, Not my models.
Easy to print Pickett Hamilton Fort 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. I've also added a girdered open piece to make sci-fi turret guns and the like. As well as a door version for secret underground lair entrances.
There are 3 bases: the organic and round are meant to be scatter terrain, the "inset" is to add to a larger piece of terrain (the originals were flush with the ground so vehicles could drive over them). The three cores need the "top open" piece glued to each. The "top closed" is as described. I would suggest not gluing the cores to the bases, so you can swap them out as needed.
The bases and tops need a little bit of basing material and details to tie them in to the rest of your terrain.
Image is of model printed in 1/52.
Scale by 1.56 for gaslands / hotwheels / 1/64
Scale by 1.786 for 28mm / 1/56 || Apparently 1/52 (x1.923) looks best for heroic 28mm.
Category: Games