1 / 1
Gigahorse-esque kit for gaslands/hotwheels — zdjęcie 1

Gigahorse-esque kit for gaslands/hotwheels

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Come support these models over on Patreon Buy my time, Not my models. Kit to make a gigahorse style car. Print one of…

Ocena
0 / 5
Polubienia
13
Pobrania
113
Wydruki
0
Wyświetlenia
682
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Come support these models over on Patreon Buy my time, Not my models.

Kit to make a gigahorse style car. Print one of the main file (gigihoss) and then choose your engine from 4x v8 engines, 2x jet engines, or a nuclear reactor. (nuke engine wants supports, the rest print without). You can also ignore the engines and just use this as a monster truck kit.

Assembly is not terribly easy(especially to keep level and square), but it does allow a LOT of freedom with where things are placed, frame angles, suspension positions, etc.

Parts notes:

  • The 2 short and two long square pieces are the leading and trailing arms and glue to the inside of the body side flaps, cut as needed.
  • the driveshaft should be glued to the diff first with the angled end turned to glue to the bottom of the frame
  • Gas tanks glue to the sides of the body flaps
  • pyramid piece is the mount for the front suspension uprights, there is a small notch on the frame to locate it.

-the flat disks are spacers for between the rear tractor wheels

Category: Games

Tagi