Magnet Separator and Orientation Tool for Small Rare-Earth Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tool for separating and orientating small rare-earth magnets.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a tool for separating and orientating small rare-earth magnets.
The tool has internal cavities for embedding 6 8mm x 2mm magnets inside the tool. This requires 5 pause operations to be inserted into the slicer at the appropriate levels for the magnets to be inserted. The first pause operation will have two magnets inserted, the second one at the bottom of the tallest step is there so that the tool can be stored magnetically attached to a metal surface.
To use the tool, you put a stack of magnets on the bottom step and as you slide the magnets past the steps it peels the bottom magnet off of the stack. you continue to slide the stack up the steps in that manner. At the end you will have 5 separated magnets all orientated with the same polarity (provided the magnets embedded in the tool are inserted with the same polarity).
There are versions for both 2mm and 3mm thick magnets up to 15mm in diameter.