Companion Cube - Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Companion Cube consists of separated parts to be able to print it with different colors and to use it as a box.
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 330
- Wydruki
- 11
- Wyświetlenia
- 1763
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- GNU General Public License v2.0
This Companion Cube consists of separated parts to be able to print it with different colors and to use it as a storage box (hollow space: 99x99x99mm).
The parts made from the original model were not really symmetrical and so I made a few adjustments.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
10%
Instructions
You need the following quantity to build this Companion Cube (color/material is your choice off course):
6x Body_plate
6x Heart_insert
6x Heart_medal
8x Edge
12x Angle
In my case, I was simply able to press (with a bit of force) the Heart_insert parts into the Heart_medal. The same applies to the medals and Body_plate (rotate the medal in about 90 degree steps if it does not fit).
Tip: print each part once and test if this works. Otherwise process (rescale for example) the parts accordingly.
The optional sticking_tool_top and *_bottom are used to fix the plates and edges after applying glue on them (look at the photos to get the idea).rn
Category: Video Games