HSW Architectural / Engineering Scale Ruler Holder (Varying Sizes) - Honeycomb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a HSW holder for your engineering / architectural rulers!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I made this holder for my Engineering / Architectural rulers! In my case I had 3 different ruler sizes. I attached 4 versions of this build so that you have options on the sizes. They're listed and described below:
1.) All 3 Sizes (this one has one of each of the 3 sizes)
2.) Size 1 is the smallest size and fits rulers with a height of 0.716''
3.) Size 2 is the middle size and fits rulers with a height of 0.786''
4.) Size 3 is the large size and fits rulers with a height of 0.850''
The dimensions shared in the picture are about 4.7% larger than the measured dimensions to get a nice snug fit.
I printed mine on a Bambu Labs P1P with PLA+ from Overture. Default settings.