1 / 2
La Pavoni Europiccola Steam Knob Lever — zdjęcie 1
1 / 2

La Pavoni Europiccola Steam Knob Lever

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Little lever adapter for the La Pavoni Europiccola espresso machine that slips over the existing steam knob. Idea was…

Ocena
2 / 5
Polubienia
9
Pobrania
54
Wydruki
1
Wyświetlenia
444
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Little lever adapter for the La Pavoni Europiccola espresso machine that slips over the existing steam knob. Idea was to not have to fully remove the C clip to replace with a different knob/lever and just slip it over the top of the existing one to get a little bit of extra leverage.

I printed mine in PLA and will update how that holds up as the machine generally radiates a lot of heat. Would probably recommend to print it at the least out of PETG just to get a little bit more thermal resistance.

You might want to scale it 0.5/1% up or down depending on your own steam knobs state.

Fusion360 file is included in case you want to do a little bit of editing of the design to suit your own needs better!

Idea for the lever was inspired by user ssh16 with the following design: https://www.thingiverse.com/thing:1974260

Check out theirs if you want something a little more "permanent".

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

0.24mm

Infill:

25%

Category: Parts

Tagi