Wyze Cam OG Mounting Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement mounting plate with added slots for zip tie style mounting
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 498
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modeled the original Wyze Cam OG mounting plate but added 2mm of height and added slots for mounting with zip ties. 2 slots run vertical (for attaching to a horizontal member) and one slot runs horizontal (for attaching to a vertical member). All slots can be used at the same time if you wish. Attached photos show the original Wyze Cam OG mount alongside my model. I recommend 3 perimeters with .15mm layer height using PETG. 15% infill is fine. Support modifier is required on the top surface where the mounting pegs are. I attached a model files with this modifier along with the various settings I mentioned already for the MK4 (input shaping) and Mini.