3000GT Shift Boot Retainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: this model kinda sucks, check description before use. 3000GT shift boot retainer ring.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE: this model sucks and it can contact the shift linkage when going into 5th gear.
If you choose to use this anyways make sure you scale the IPT file down 1% to make it fit better. It may take some griding with a dremel to make sure it clears all gears.
THIS, is a free STL of the shift boot retaining ring for a 3000gt. It isnt perfect but it definitely works. the IPT file is mirrored and will need to be mirrored to print correctly. THE 3MF IS CORRECT TO PRINT AS IS. it is completely free to remix or change to your needs just link my original please.
The IPT doesnt print as is. it needs to be scaled down 1% on the width of the part so the clips dont break. yes, its ugly and bad but damnit if it isnt functional.
Print Settings
Printer Brand:
Anycubic
Printer:
Vyper
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
10%
Category: Automotive