High Speed PETG Input Shaping Profile

This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4.  I tuned this for use with PETG, since that is mostly what I print in.  But, I have tested it with some of the PLA filaments I have around and it works ok with those, too… but a few of the retraction settings need adjustment.  

The 32m profile is pretty stable and is fairly consistent in how it prints.  There is a little stringing with most filaments I have tried, but it is one of the things I often find myself having to tune on a filament by filament basis, anyway.

The 22m profile applies a LOT of the settings from the 19 minute bonkers Benchy on the Mini with the Input Shaping profile. I was able to get it down to a stable 22m print time, but the surface quality could be better, especially on the top surfaces and overhangs. 

I have been using the baseline Benchy as the test print, and loading it into the profile to see what it slices down to, timewise; but this was really designed just to make the printing of larger PETG parts faster than input shaping alone would be.  It's not an official speedboat or anything like that… it's just a couple of fast PETG profiles.  Next I'll take on migrating some of these settings back to the Mk3 to see how fast I can make that while still having a reliable print. 

I included another large print with this profile to show the end result on a non-benchy print.  Both Orange and Blue filaments were Kinluot PETG, printed with settings tuned in the attached 3MF files.  

Please remix this profile for both quality and speed for whatever model you use, and let's see how fast we can print stuff :)

Enjoy!