1 / 6
Colorful tree night light!
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mainframe for a tree-shaped modern nightlight!
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 806
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (42)Powiązane
DISCLAIMER:
Some initially posted files have been accidentally mirrored instead of flipped, and the top would not come together due to this. It's been fixed now.
Reprint rim_top and cap_top with the new files.
Apologies for the wasted filament :(
How to print:
- Material: PLA/PETG
- No supports, layer height ≤ 0.2mm
Construction:
- You will need 3 short metal rods/pipes to complete the top. These are press fit.
Go hammertime on them if needed! :D - You can use the cable duct inside the tree base to connect your light source.
I would recommend to use some led strips (mounting included). Slide the fasteners
onto the rods, and push the lighting tape through. - A harp for the top can be made with ordinary print paper, taped together,
slid on, and then clamped by the rim pieces. These in turn, can be easily glued on. - All necessary details can be found in the manual.
The print does not include the base! Show your creativity, and make your own!
See the assembly manual in photos for further instructions!
Commercial use strictly forbidden under CC 4.0 Non-commercial license.