1 / 2
CZ75 Shadow 1/2 picatinny magazine for dry fine training (Mantis)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottom part of CZ 75 Shadow 1 / 2 magazine with picatinny rail for Mantis X.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 2545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (31)Powiązane
This is a bottom part of CZ 75 Shadow 1 / 2 magazine with loose picatinny rail to attach the Mantis X device. You don't need to glue the picatinny into any of your magazine bottoms anymore.
This works well with the magwell as well.
Notice that the upper part is not shaped correctly, so if you push it too far, further than the locking lugs, it may get stuck.
Print with picatinny rail on top, use support for at least the locking hole. I used automatic tree support on Prusaslicer.