1 / 3
Caverna organizer Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified version to enable one-box expansion of races.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 1045
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
You can print it as below.
Original printout
- caverna - players holder
- caverna - tiles holder 2x24
- caverna - tiles and markers holder
- caverna - coins holder → You have to change the height to 39mm and pull it out to prevent it from spilling.
- caverna - tiles holder 1x24 → Pick 7.
New output
- caverna_card x3
- caverna_res01 x7
- caverna_res02 x4
- caverna_res03 x3
- caverna_longtile01 x2
- caverna_tribetile
- caverna_tilesandmarkersholder_addon
- battletile_lib
How to organize
- Gather the resource containers. (In the case of [res03], make sure there is one vertical line.)
- Place the construction tile storage plate on its side.
- Place the card holder in an upright position.
- Stack your personal plates.
- Stack and organize various tile boxes as shown in the image.
- Build a timing board.
- It is taller by stacking the construction boards added in the race version and expansion to a total of 4 to form 3 blocks.
- Spread out the information cards added in the expansion and spread them out.
In the photo, I tried making a new design of the power token, but it wasn't particularly efficient, so I discarded it and added a cap.