Versa 3 Replacement Band
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement wristband for the Fitbit Veras 3 Smartwatch, maybe works with other models too, idk.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
I have remade this model multiple times, only the 2-Part-model that is outside of the folder has held up for a long time for me. To use that, first print the TPU part and then print the PLA part with a pause to insert the TPU part. If you want the other models for some reason, they are inside the folder. I left the old model description as a guide for using the other models and because i am lazy. The pictures are also not up-to-date.
Old description below
|| ||
\/ \/
A replacement wristband for the Fitbit Veras 3 Smartwatch (and possibly other models ) to be printed flat on the bed with PLA, PETG or TPU (haven't tried TPU, maybe the snap fit will not work). I reccomend to use 0.2mm layer height, no top and bottom layers with 20% infill for a nice flexibity and look (i used a modifier to get top and bottom layers on the snap in feature). You can obviously try other things too and top/bottom layers are probably needed with TPU.
To make it look cool i used Honeycomb infill and rotated the piece 45° to align the infill.
I have been wearing it for 2 days now without problems.
If enough people ask for it, i can make the other band too.
Good Printing :)
Attention! Depending on your Filament (especially PLA) it might snap which is why i added a 1mm thick band to either print in 0.2mm or 0.16mm layer height. If your band looks like it might break or goes white at some places due to bending, you can try slightly remelting the plastic with a hot air gun or hairdrier as a hotfix (pun intended ;).
I now also added a version with a hinge, it works but might be uncomftarble depending on your wrist because it distributes the force differntly.
The 0.8mm PETG Band works best for me.