1 / 6
Lord of the Rings Trilogy Poster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All 3 Main Trilogy Poster of the Lord of the Rings.
- Ocena
- 0 / 5
- Polubienia
- 72
- Pobrania
- 233
- Wydruki
- 1
- Wyświetlenia
- 1632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (103)Powiązane
As a LotR fan i was inspired by Large Cat, who made the RotK Poster himself, to make all of the 3 Posters in Hueforge in the same Dimensions and Style.
Im not the Artist who made the Artwork himself! the Paintings are found in the deepths of the Internet.
- Update 16.10.23
i edited lotr3 to get a better look
red is now dark red
color changes are now at 4.8.14
the .3mf File is reuploaded
I Included the .3mf File with all 3 Poster in it.
Change the Filament as you like it, i tried to match the colours of the Poster with the given Settings. Just make sure you have the correct colors selected before you print!
I would love to see your Makes :-)
Instructions:
- lotr1:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Orange
At layer #9 (0.8mm) swap to Lemon Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.
- lotr2:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Cyan Transmission Distance: 2
PLA BambuLab Matte Dark Green Transmission Distance: 2
PLA BambuLab Basic White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #4 (0.48mm) swap to Dark Green
At layer #8 (0.64mm) swap to Cyan
At layer #13 (1.04mm) swap to White for the rest.
- lotr3:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte dark Red Transmission Distance: 2
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to dark Red
At layer #8 (0.64mm) swap to Lemon Yellow
At layer #14 (1.04mm) swap to Jade White for the rest.