Bike mount for watches with nylon strap (short stem)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bike mount for watches with a nylon strap
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 44
- Wydruki
- 2
- Wyświetlenia
- 613
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is a bicycle watch mount that is held next to the stem. The mount works for watches with a nylon strap. I did this model because the official Garmin bike mount kit does not work for nylon straps. I personally like the position of this design as I find it to be on a safe spot in case of falling. The design required 2 M3 bolts with locking nuts.
This design was made for my Cannondale Scalpel Carbon SE2 bike, which has a stem bar with a diameter of around 34mm.
I have also thise design for a bike with a longer and wider stem: https://www.printables.com/model/615837-bike-mount-for-watches-with-nylon-strap