TIG TUNGSTEN GRINDER for DREMEL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I redesigned it made it smaller and compact and still uses the collets
- Ocena
- 3,333 / 5
- Polubienia
- 85
- Pobrania
- 616
- Wydruki
- 4
- Wyświetlenia
- 2077
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Re-design or Re-mix
This was a new setup after trying some on else's (TIG grinder uses collet by jobstulus September 30, 2020). Not sure why so big but was a great idea to use the tig collet for support. It had merit as you just use the collet size needed and insert it in the appropriate angle needed.
So I redesigned it made it smaller and compact and still uses the collets (I used the shorter setup for the ceramic cups).
I included all the files in IGES and SETP so you can modify if needed.
Rich (RAMServices)
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK2S
- Rafts:
No
- Supports:
No
- Resolution:
0.15
- Infill:
20%
- Filament brand:
Sunllli
- Filament color:
Orange
- Filament material:
PETG
- Notes:
PETG OR ABS will work great