CR-6 SE Daughterboard Mount with camera attachement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification of the daughterboard mount to allow placement of a nozzle camera and LED strip for lighting.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I used a USB OV5640 camera with a 160 degree lens I scavenged off of another OV5640. Lights are a 5v white USB LED strip. Printed out of PETG with 5 perimeters, 5 top/bottom layers, and 25% infill.
To mount the LED strip, cut the USB connecter off and strip the wires back. You can either splice into the connector or repin a new connector - the black wire goes to the top pin. The adhesive backing on the strip is enough to hold it in place.
For the camera, gently turn the lens counterclockwise to unscrew (there is some resistance initially due the glue), then screw in the lens of your choice. Don't glue it in place yet. Route the camera through the hole in the back and glue it to the pad (NOTE: you probably want to sand along the ribbon cable's path to knock down any sharp edges). Attach the camera's board to the back of the daughterboard mount, making sure placement doesn't interfere with the X-axis endstop. Once you have the camera connected and can view the stream, you can loosen or tighten the camera lens to focus the image. Once you're happy with it, put a dab of glue on the threads of the lens to keep it in place.
Side note - the distance between the mount and the nozzle is 34.5mm. I'm using the microswiss all-metal hotend and a diamondback nozzle. This distance is also the correct distance for the 3DO nozzle cam, though I broke two of those cameras trying to manage the long ribbon cable.