Pocket Hole Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tool for pocket holes.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 192
- Wydruki
- 1
- Wyświetlenia
- 1932
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a tool for pocket holes.
It takes up the idea of existing classical instruments, and adds a knurling to stop more permanently, and some notches to help with centering.
It is suitable for standard 9.5 mm diameter bits.
It is necessary to insert two small 12 mm outer bushes to reinforce the holes where the drill bit passes.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
35
Notes:
Print with the piece positioned as shown in the picture. The supports are not necessary but I recommend them, as well as I recommend using the raft.
Print if possible with 4 perimeters and an infill of 35%.
Post-Printing
Insert into the cavities, and glue with two-component glue, two pieces of bushing with an external diameter of 12 mm and an internal diameter suitable for the drill bit to be used (eg 10 mm for a 9.5 mm drill bit).
Category: Tools