1 / 3
Scuba regulator HP and LP port plugs (for storage only) — zdjęcie 1
1 / 3

Scuba regulator HP and LP port plugs (for storage only)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Scuba regulator HP and LP port plugs (for storage only)

Ocena
5 / 5
Polubienia
11
Pobrania
107
Wydruki
2
Wyświetlenia
446
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Dust caps/plugs for the high and low pressure ports of scuba regulators. These are for regulator storage/transport only, there's no provision for any O-rings and don't expect these to withstand actual cylinder pressure!

The thread part should be printed with thin layers for good resolution: the gcode files here have been sliced with variable layer height and contain required support material too. Best printed with the threaded part pointing up and with supports as required.

Tagi