1 / 3
Utility Blade Storage Module Gridfinity [v2]
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Utility Blade Gridfinity Storage
- Ocena
- 4,5 / 5
- Polubienia
- 134
- Pobrania
- 753
- Wydruki
- 8
- Wyświetlenia
- 2403
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 8) (Komentarze: 15)Remiksy (3)Kolekcje (318)Powiązane
Simple way to store…. like a lot of utility blades I have dialed in the clearance so the blades can be easily pulled out an angle but have a snug fit. Due to interest in this model I have made some requested changes.
Why so many blades? I designed it to fit the Milwaukee Knife Blades Bulk Pack because they are decent blades and I was going through a lot when I was working in a shop.
Change Notes for v2
- The new version is now stackable with other Gridfinity modules or heaven forbid if you had enough utility blades to necessitate another utility blade storage module you could stack it on top of that.
- Tightened up the back wall for a more snug fit of the blades
- Removed base magnet holes because they were unnecessary. It has sufficient inertia with the blades.
- Aesthetic chamfering and filleting
Print Settings:
- Polymaker Polyterra PLA @ 2 perimeters and 15% infill