The Shrub Cylinder - Dart Zone Outlaw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low-hardware replacement cylinder for the Dart Zone Outlaw that improves performance and reliability!
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 209
- Wydruki
- 5
- Wyświetlenia
- 2139
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's finally here! Introducing the Shrub Cylinder - a replacement cylinder for the Dart Zone Outlaw that uses very little hardware and improves performance! This model is designed to be easily printed and use minimal hardware, and can use either springs or elastic cord to function!
I recommend printing these parts at a somewhat high resolution of at least 0.16mm to keep the dart chambers smooth. The parts can be quite thin where they touch the build plate, so I recommend brims. All files are pre-oriented for convenience. Supports are not necessary, though bridging is required in places.
Necessary hardware:
- 1x Nerf or Dart Zone standard screw (M2.6mm, any length). These can be purchased from suppliers such as Out Of Darts (link here) or salvaged from other blasters.
- Elastic cord of your choice. I used 1mm elastic, which can commonly be found at crafts supplies stores as “beading elastic”. Other sizes may be used, but it must be very thin.
OR
- A spring with an internal diameter greater than 7mm, able to compress down to 3mm and extend at least 6mm.
An assembly guide for installing with elastic cord may be found below:
https://youtu.be/z1FclxTByYg?si=N1qtx8wDvc-rtfal
There are two different versions of the Cylinder Body, the default version with added greebles, and the ‘clean’ version that is smooth. I have also included STEP files in case you want to make your own aesthetic or functional changes!
Enjoy!!
If you like this design, please see my other mods for the Outlaw! This quadfecta makes the Outlaw the perfect sidearm for shield use and general gameplay!
“Ex” BCAR Front End - Dart Zone Max Outlaw