Kubota L175 ( and others) Modern Fuse holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a hard time finding fuses for the L175 I have, so I designed and printed a fuse holder for modern blade fuses.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 748
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This fuse holder is designed around https://www.amazon.com/dp/B0BD15SKDP/ref=twister_B0BD155YWW?_encoding=UTF8&psc=1
BioFuse (3 PACK) Standard ATO 12-AWG In-Line Panel Mount Waterproof Fuse Holder for Automotive and Marine use. Blade Group: ATOF, ATC, ATS, APR
Also needed is an M4 heat insert, and a knurled screw (m4) and nut, or make your own thumbscrew. my tractor uses 3 fuses, but I know some use 4 depending on options, so I built it with the option for 4 fuses, any unused fuse spaces can be covered on the back side with the fuse cover, and I also designed a fuse holder that drops into that unused spot and holds a spare fuse. I printed on my Voron 2.4r2 with black ASA to make it UV resistant, and the cover has a slot in the under side for a piece of TPU to be super glued in as a seal against the dash. as I have not got the M4 heat inserts yet, it's not in the picture, but I think it's location is self explanatory.
Designed in Fusion360 (Big thank you Autodesk for the personal -not commercial use, you rock) fusion f3d file included if you want to change anything.