Quick holder for Kaihl / Durock hot swap adapters for cherry switches.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder that keeps a Kail or Durock hot swap adapter firmly in place, to be used as part of keyboard projects.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 621
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Minimalist holder for Kaihl (black) and Durock (orange) hot swap adapters for keyboard projects. Holds the adapter and switch firmly in place with little to no wobble.
I incorporate these in projects that use cherry switches, for a one button toy to a full keyboard. From importing them into other models and adjusting the geometry to printing a single one and hot-gluing it to another object.
It saves some work if the adapters are per-soldered to your wires, and there is a little window that makes it is possible to solder later with a thin soldering tip and a steady hand.
- Place the adapter in the base as shown.
- Align the holes in the lid with the pegs on the base and press firmly together.
- Use pliers to squish the protruding pegs in PLA or a hot flat item if using non-cold-squishable materials.
- Insert Cherry MX compatible switch.
The whole idea is to be quick and dirty for when one needs 100+ parts that no one will ever see.
I used generic PLA, a 0.6 nozzle, and the tallest layers I could get away with.