Star Wars TIE Defender (Canon/Legends Versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TIE Defender from Star Wars at 1:270 scale.
- Ocena
- 5 / 5
- Polubienia
- 149
- Pobrania
- 928
- Wydruki
- 4
- Wyświetlenia
- 2954
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Replica of the TIE/d Defender from Star Wars.
It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends.
The only difference between the canon and legends version are the wings. On the canon version, they are pointier and look very similar to the wings of a TIE interceptor. The legends wings are a bit more symmetrical and have slanted strouts that go through a round disc at the base.
The scale is at 1:270. Canon dimensions are 41.3mm x 38mm x 36.9mm. Legends dimensions are 42.8mm x 33.9mm x 37.2mm.
Holder uses a small base and small pin from here.
Print instructions
Printed at 0.07mm layer height with supports on buildplate only. Rotate by -90° along the x-Axis before slicing. If you want to use the holder, use the .gcode-file with peg or add a small peg before slicing.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#