Senseo HD 6554 handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle for the Senseo HD 6554 coffee machine.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 248
- Wydruki
- 2
- Wyświetlenia
- 1117
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Replacement handle for the Senseo HD 6554 coffee machine.
I would recommend printing it with it's side down with enabled supports. This helps making the part structurally stronger due to the fact that the strength is worse in z-direction because layer adhesion is worse than the strength in a single layer.
100% infill is recommended.
IMPORTANT UPDATE
After my part broke after a few months of usage, I've tinkered a lot with different printing methods to improve strength.
The best method is to insert a 2mm thick and 50mm long metal part into the updated file. This increases the strength exactly at the part with bad layer adhesion.
For this, I bought one meter of 2mm welding line at a local store for just 1.80. I would recommend inserting it carefully, you may have to use a hammer to properly insert it.
If you don't want to enhance the strength by using metal, just print the normal version.