Slim modular Raspberry Pi Pico Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very well-fitting two-piece case for the Raspberry Pi Pico with multiple variants you can choose from.
- Ocena
- 4,867 / 5
- Polubienia
- 118
- Pobrania
- 1392
- Wydruki
- 18
- Wyświetlenia
- 5725
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The case consists of two pieces (upper & lower). Every upper part of the case is compatible with every lower part. Just print what fits your application the best :-)
Upper part:
Covers the top of the Pico where the Raspberry logo and the onboard LED are located. There are two variants: With “Pico” text and without.
Lower part:
Holds the Pico Board firmly into the upper part. There are three variants:
- Lower case: Covers the pins but they are still accessible. Additional openings allow to still see the pinout labeling on the board.
- Lower case closed: Covers everything.
- Lower case minimal: Just a tiny frame that fixes the board in place and makes everything very easy to access.
I added .3mf files of the closed and no text variants so you can get creative with your own case!
Screws:
You need four M2 screws to connect both parts of the case.
Max. length: 12mm
Min. length: 8 mm (best for “minimal” case variant)
Print instructions:
0.2 mm layer height, no supports.
I would be very happy if you would share your experience with the case and photos of the printed results in the comments! :-)
This is my private creation allowed only for non-commercial use.