Wrench Holder for Hasky/Parkside (2 mounting orientations)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wrench holder that fits Hasky ratcheting swivel end wrenches as well as plain Parkside wrenches. It…
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 333
- Wydruki
- 0
- Wyświetlenia
- 1696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a wrench holder that fits Hasky ratcheting swivel end wrenches as well as plain Parkside wrenches.
It features:
- Embossed text for ease of use (the text is recessed, you can use a Posca marker and a scotch brite to make the text easier to view, you can also use the pause at height script in Cura and print in different colors).
- Magnet Slots for 6x3 neodymium magnets
- Chamfered 3mm holes to be used as wall mounting points
==Note:== I have added embossed text for wrench sizes and mounting holes (I realized after the fact that this holder can be use mounted both on a wall or placed in a drawer).
The Holder might fit other wrenches especially if they meet the following:
Minimum shank length: 60mm
Maximum shank thickness: 5mm
==Important:== Even if the aforementioned criteria is met other wrenches might not fit, for this reason I have included a STEP file so that you are able to either compare the dimensions or modify it to your needs ;)
If you liked this model you might also like my Youtube Channel From Rags to Wrenches where I upload videos about my learning experiences as a vehicle mechanic. I plan to upload videos about 3D prints and electronics in the future as well.
You can also go give me a follow on Linked in.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
25
Filament: eSun PLA+ Pine Green / Purple
Notes:
Walls: 4
Infill Pattern: Octet Subdivision
Nozzle: 0.4mm
Nozzle Temp: 210 C
Bed Temp: 60 C
==Note:== You might have to use Cura's Arachne engine to print the embossed text (I have not tried to print the updated version that has embossed text, which is also the reason the photos are different than the actual model).
How I Designed This
I designed this using Fusion 360 for Personal Use.
Here's my workflow simplified:
- Created a wrench placeholder sketch using the average dimensions of the 2 types of wrenches.
- Used spacing constraints to keep the Wrenches an equal distance apart form each other.
- Extruded the wrench sketch negative space.
- Added features like:
- Rounded corners (to reduce sharp corners and make the design less prone to snapping)
- Countersunk Holes for mounting
- Magnet Slots
- Embossed Text for ease of use
Category: Tool Holders & Boxes