HC-SR04 distance sensor mount for Joy-It robot car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The model has one 3.5mm hole to mount it onto the car. I every corner there is a 3mm hole to attach the sensor on it.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For a school project we are using the Joy-It robot car. On this car we have to mount 2 HC-SR04's. I did this with the help of this (self-made) model.
As you can see the sensor fits perfectly in the mounting piece and the mounting piece fits perfectly in the robot car. (Yes a attached the sensor with rubber bands because I did not have a 2mm screw for the little holes of the sensor).
On the photo there is only one model attached to the car. (I know I need more sensors (and other things) for the car to work!)