Editable signs for doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print 2 small signs with just the room number, or one larger one with a number and description.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed new signs for the doors in the school building we purchased and repainted. It was about half the cost to buy a Prusa Mini and filament than to order the new signs. I didn't find a file that worked well where I could edit the room numbers, so I made a very basic template. It is designed for fast printing (3H 30M for 2 signs) and to stick to a wall with adhesive. Printed with old Dremel PLA so I had to modify the temps to get the first layer to stick and lay flat. Check filament temps before printing! It is 10% grid infill (gyroid leaves surface marks), 3 top and 2 bottom layers, and 2 perimeters. The height of the text can be adjusted down for faster printing if desired. It is set to change filament for the text to make them stand out. Enjoy!