Beehive-Inspired Floral Arrangement Vases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nice beehive-inspired vases designed for small floral arrangements.
- Ocena
- 5 / 5
- Polubienia
- 196
- Pobrania
- 333
- Wydruki
- 2
- Wyświetlenia
- 2311
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Nice beehive-inspired vases designed for small floral arrangements. Perfect on your kitchen table, counter, in the living room or anywhere else you like. Even better with fresh cut flowers from your garden.
This project is my wife's brainchild; she loves flowers and has been thinking about the idea for seven years. When I bought my MINI it was finally possible to create it! (Now she likes the printer as much as me 😅) I've modelled the vases according to her specifications 📋🤓
- The low design makes it perfect as a table centrepiece to avoid breaking line of sight with the other people sitting at your table.
- The holes and suspended grid on the cap keep flowers in place around the whole top surface, maintaining your arrangement (preventing flowers from falling over) even if you need to remove the cap for watering or cutting stems.
- The cap is a comfortably loose fit on the pot (but still not too loose) so that it's easy to remove with flowers in place.
- The decorative hexagonal holes on the front of the pot can also be used for watering.
The “original” (rounder) model is our first take. Some of you might like it but it was a bit too big and round to our taste.
We'd love to see your makes!
Printing Instructions
You can use the provided 3mf files as a starting point, which are pre-configured for the pot and cap, including the pictured color change for the base of the pot.
I recommend printing the pot with 100% infill for water-tightness.
Waterproofing
The pot should be watertight if printed with the reference settings in the 3mf, but depending on filament and printer it might be necessary to waterproof the pot to prevent water from slowly leaking through. A cheap and eco-friendly solution is to cover the inside of the pot with wax as described here.
Remix Instructions
Fusion 360 source file included. The pot and caps are exported with a very high resolution (very low Surface Deviation in the Fusion 360 STL export dialog) to get perfect circular shapes and to avoid visible polygons on the surface once printed. Make sure to do the same if you remix the design!