Osmo Action 4 USB-C Cable Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement USB-C Door to reduce cable strain on the Action 4 Cam.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 611
- Wydruki
- 0
- Wyświetlenia
- 3900
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
USB-C Door for cable support and to reduce cable strain on the Action 4 Cam. Found myself knocking around the camera cable a lot when livestreaming ergo this little block to help support the cable better.
I've printed most of my test parts in PLA so far on my Mk3 at .24 layer height, but I would recommend PETG or something else that handles heat well. Additionally you may need to tune the model to fit your cable and or printer as it's quite a precise fit.
Warning, It can be hard to take off!!! I had to use a dental tool to remove one of the revisions.
2024-02-26: Added Medium/Large Versions
Have not tested on an Action 5 but it seems to be the same from photo's I've seen.