1 / 9
Prop Grenade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Found a few grenades online. Didn't find one that worked well. So I designed my own.
- Ocena
- 4,957 / 5
- Polubienia
- 2307
- Pobrania
- 9673
- Wydruki
- 98
- Wyświetlenia
- 38 647
- Oceny
- 94
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 98) (Komentarze: 174)Remiksy (9)Kolekcje (2467)Powiązane
Update: I added an update per request from Bogoko1 I edited the top part of the ball and the screw. This makes it easier to repair. The photos of the printed parts are before the update.
Was struggling to find a grenade I was liking. So I designed my own based on some models I found online.
Goals
- Look cool
- No glue
- Spring to push off Safety Lever
- Real looking safety pin
- Easy to print
What you will need
- Pen spring
- Cotter Pin 3/32”x1”
- Key Chain Ring
NOTES: Make sure to read instructions on assembly well.
- Place on print bed as shown in the photo
- Print, make sure to print 2 of the Screws
- Place Pen Spring into the Handle Holder/Fuse FIRST before screwing in the ScrewV2. See photo: Pen spring will be held into place by the threads from the ScrewV2 and the Handle Holder/Fuse.
- Have Fun
Make sure to visit Nick S for his wonderful grenade holder.
https://www.printables.com/model/666344-complaint-dept-name-plate-and-grenade-base