Pivoting Display for Ender 3 - Pro - V2 - Ender 5 - BTT 35TFT & Stock - with some improvements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pivoting Display for Ender 3 - Pro - V2 - Ender 5 - BTT 35TFT & Stock - with some improvements
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original is indeed slim, and sharp looking. I ran into some issues with it, and I also created some options (such as mirroring the mount to fit my situation). As such, it can now be mounted on either side by just choosing which parts to print.
What my remix addressed:
- The original design's side panel part for support of both USB access and SD Card access has the USB port far too small to accommodate USB thumb drives. My remix corrects that, allowing both USB and SD to work in the same part. Thus, the original's narrower part named BTT_Curved_RH_Slim_Without_SD_Card_Adapter_V1.stl, is replaced in my remix with BTT_Curved_RH_Slim_with_USB_and_SDCard_Ports_V2.stl.
- The Pivot Knob didn't fit well for me until I made a larger edition.
- The BTT_Display_Reset_Button didn't work for me at all until I made a taller version with a deeper socket.
Side note: I have it installed on an Ender 3 v2 that has been modified with the "Ender Extender 400XL" kit. As you can see from the pics, I have it on the left side of the printer, and adjacent to a new case for BTT SKR board that now drives the printer. Of course you can mount it on the right side if you like, as in the original.