1 / 3
5.5mm Endoscope Crossmember for Elegoo Neptune 3 5015 blower fan shroud — zdjęcie 1
1 / 3

5.5mm Endoscope Crossmember for Elegoo Neptune 3 5015 blower fan shroud

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made a quick and dirty remix of the crossmember for a 5.5mm Endoscope with friction fit.

Ocena
0 / 5
Polubienia
4
Pobrania
35
Wydruki
0
Wyświetlenia
415
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The original crossmember was designed for a larger Endoscope that is sold out on Amazon.  The 5.5 mm version I purchased was way too small for the original design, so I quickly designed this friction fit holder in one piece so there is no need to source small screws to hold it in.  

This was designed for the following camera - https://a.co/d/aIPNp88