1 / 4
Pets at Home Wire Hamster and Mouse Cage tube blanking plate (may fit Ferplast cage also) — zdjęcie 1
1 / 4

Pets at Home Wire Hamster and Mouse Cage tube blanking plate (may fit Ferplast cage also)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pets at Home Wire Hamster and Mouse Cage tube blanking plate (may fit Ferplast cage also)

Ocena
0 / 5
Polubienia
10
Pobrania
94
Wydruki
0
Wyświetlenia
974
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Whilst I don't recommend using the Pets at Home Wire Hamster and Mouse Cage full time as they are small, they are great for Hospital cages or introduction cages due to being so cheap new or even free second-hand..
We needed to block off the tube holes in the cage so I designed this to fit.. 
Unfortunately, they really need to be printed on the side for strength so need supports or use the no-support version (Clip may not be quite as firm)
 

This also MAY fit the Ferplast cages as I think they have the same design. Since I don't have one I can't test this, however.. Please let me / others know if they do.

Printed on a Voron 2.4
3B3D ABS
0.2mm Layer height etc Standard settings
Tree supports only for the clip that sticks out on STL that needs it. All other supports are not needed on that file.


24 Mins Print time Supports
22 Mins Print time No Supports
 

Tagi