1 / 6
Trofast support — zdjęcie 1
1 / 6

Trofast support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Support for Ikea Trofast box cabinet

Ocena
5 / 5
Polubienia
74
Pobrania
446
Wydruki
15
Wyświetlenia
2572
Oceny
14

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

It has been bugging me that these boxes droop when pulled out half way. Yhe box is weaker in the middle thr weight of the contents make the box fall off of the grooves when pulling them out, even when empty

These little stabilizers provide extra support for the middle section of the boxes. They do not impede or even touch the box when fully inserted, but provide extra ledge when boxes are pulled half open (etc when the kids are playing with their toys).

 

Symmetrical, so no need for mirroring.

Two holes for screws, but I use only one screw for each support. This allows for using alternate holes for opposing sides of the cabinet and the screws don't collide.

Screw hole: Cavity for a round head of 6,8mm diameter, 3mm deep. Thread diameter 3,5mm.