Keyfob / Remote Control slider and buttons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keyfob / Remote Control replacement slider and buttons for cheap chinese 4-Button universal keyfob / RC.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I was sick and tired of buying yet another RC/Keyfob because I either lost the protection slider again or the buttons which are not raised enough for proper men's hands will not work anymore. So I designed my own which work much better. The slider is a bit higher than the original because the button are also higher.
The buttons should be printed with the hollow part down and without support.
The slider should be printed upwards with supports (see picture).
I used PLA+ filament but PETG or ABS should also work fine.