1 / 4
Naruto Kunai
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small kunai that prints fast does use support. and prints in under 40 mins. your get a 2 for one if your careful.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 623
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
A small Kunai that is about 145mm long and relatively small, with 15% infill will print in under 40 mins, and as a bonus when you print with grid support and brim in prusaslicer and you carefully remove the support can have 2 for one as the supports have a cool minecrafty vibe if cleaned up carefully. Be careful making this for a child as this bad boy is sharp as heck and can do some damage!