Dishwasher Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Old plastic rollers in my dishwasher wore down and kept falling off, so I measured them and made a replacement.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Should be printed in PETG or another high melting point material, PLA will melt and warp at the temperatures inside a dishwasher. PETG is also on the more food safe side of filaments, so it's what I used. Definitely requires supports; with the geometry of the part there isn't really a way around that. It snaps into place and then rolls freely. I'd recommend either printing two at a time or doing some kind of pausing between layers because the part is small enough to cause blobbing in PETG. It will string a lot without being dialed in too.