Curved Quest 3 Adapter for Quest 2 Headstraps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal adapter with a proper curve to attach a Quest 2 headstrap to a Quest 3 VR headset.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 377
- Wydruki
- 6
- Wyświetlenia
- 2482
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
None of the adapters I tried had the proper curve to mate up to the arms on the Quest 3, so here's my attempt at one that's working well for me.
There are two versions - one that needs supports (shown on the headphone jack side) and one that doesn't (shown on the USB port side). Functionally, the one that needs supports is lower-profile and more flexible, but the no-supports one has a nicer finish, so go for what you prefer.
I recommend 3 perimeters for either and organic supports if you go that route.
It has a minimal footprint on the bed, so you might need to go slow at first and possibly add a brim, but I was able to print it as is on MK3S with PETG on a textured sheet.