Jace Beleren Armor Medallions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Medallions made for cosplaying jace beleren.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These medallions are inspired by the Gatherer's Tavern statue, but they get some design element from other versions of Jace too. I suggest printing them at 80° or more vertical with 0.15mm or lower layer height to maximize details while avoiding supports inside the channels.
Mounting is left to the user, I use heat inserts but magnets can work: adjust as needed, they are thick enough to be drilled into and accept threads or inserts or anything that comes to mind.
My photo has them covered in silver leaf, with clear lacquer for the center channels. Chrome paint can work too with a slightly different tone. The model is crumpled a bit to take weathering, which I do recommend.
There is also a clean version with less details (and lower poly count) if you prefer them clean)