Battery organizer for classic and cell batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete organizer with an insert for cell batteries
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 187
- Wydruki
- 1
- Wyświetlenia
- 1270
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I borrowed two of the models here and modified them to suit my needs.
You can store AAA (32 pcs), AA (40 pcs), C (5 pcs) and E23A (12 pcs) batteries with the basic case.
But since most of us also use button batteries, I borrowed another model, adjusted the size to fit in its place and has the following slots:
1x 6.15 mm (AG0/LR63/LR521)
2x 7.15 mm (AG1/LR60/LR621, AG4/LR66/LR626)
3x 8.25 mm (AG2/LR59/LR726, AG3/LR41/LR736, AG11/LR58/LR721)
1x 8.3 mm (AG5/LR48/LR754)
3x 9.8 mm (AG6/LR69/LR921, AG7/LR57/LR926, AG9/LR45/LR936)
4x 11.9 mm (AG8/LR55/LR1120, AG10/LR54/LR1130, AG12/LR43/LR1142, AG13/LR44/LR1154)
1x 16.4 mm (CR1620)
3x 20.4 mm (CR2016, CR2025, CR2032)
see original schematic below.
I supply two more versions of the roof, Czech and English.
Print at 0.2mm and 15% infill.
Print time is around 15 hours.
Thanks go mainly to the authors of the original models.