Knobster DIY Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a case for the Knobster DIY for Air Manager.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 191
- Wydruki
- 0
- Wyświetlenia
- 1091
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take on a case for the Knobster DIY for Air Manager. https://siminnovations.com/wiki/index.php?title=Knobster_DIY
I purchased the Arduino Nano from Amazon. https://www.amazon.com/dp/B09KGVDXZY?psc=1&ref=ppx_yo2ov_dt_b_product_details
I purchased the Dual Rotary Encoder from PropWash Simulations. https://www.propwashsim.com/store/dual-encoder-kit
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
20
Filament: Hatchbox PLA Black
Notes:
I used Organic Supports and they worked really well.
Fully Assembled
Top removed
This is a lot taller than the store bought version, but that is because I chose an easily attainable dual rotary encoder from PropWash Sims.
Everything just slides into place on the base piece.
This setup makes it easy to use the base as a holder while you cut and solder the wires.
How I Designed This ===================Fusion 360
Category: Electronics